Close

Contact Us or Call 1-800-786-6112

JUNG Machine Skates: Capacities Up to 160 Tons

Our machine skates are Made in Germany by Jung and offer the highest reliability, ease of use and function employing superior technology, engineering, and manufacturing quality. Our equipment skates provide stable dependable support for load transport, roll & turn easily, and move loads safely even at the maximum rated capacity. These machinery movers offer the following features:

 Toolwell's Jung rigging equipment moving a heavy load using rigging skates, moving skates, rigger skates and equipment skates.
  • Protection: Patented JUWAthan Wheels will not damage floors or leave marks.
  • Safety: Low Profile keeps load close to the ground.
  • Ease of Use: Rigging skates roll & steer easily with less pushing & pulling needed.
  • Stability: Our 3 point skate system won't slip out - even under pulling & tugging.
  • Customization: Mix & Match individual machine skates to fit oddly shaped loads.
  • Compatibility: Skates are interchangeable with all models dating back 30 years.
  • Finish: All steel components are powder-coated or galvanized for corrosion resistance.
  • Peace of Mind: Lifetime Technical Support on all equipment skates.

6 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A3 & Straight-line machine skate B3 for heavy equipment moving.

Model A3

Steerable Front machine skate with pulling handle


Model B3 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 6 tons (13,200 lbs)
Each Skate: 3 tons (6,600 lbs)


3.3" Wheels

(4.3" Skate Height)
Non-Floor Damaging
For Level Surfaces

12 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A6 & Straight-line machine skate B6 for heavy equipment moving.

Model A6

Steerable Front machine skate with pulling handle


Model B6 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 12 tons (26,500 lbs)
Each Skate: 6 tons (13,250 lbs)


3.3" Wheels

(4.3" Skate Height)
Non-Floor Damaging
For Level Surfaces

18 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A9 & Straight-line machine skate B9 for heavy equipment moving.

Model A9

Steerable Front machine skate with pulling handle


Model B9 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 18 tons (40,000 lbs)
Each Skate: 9 tons (20,000 lbs)


3.3" Wheels

(4.3" Skate Height)
Non-Floor Damaging
For Level Surfaces

24 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A12 & Straight-line machine skate B12 for heavy equipment moving.

Model A12

Steerable Front machine skate with pulling handle


Model B12 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 24 tons (53,000 lbs)
Each Skate: 12 tons (26,500 lbs)


3.3" Wheels

(4.3" Skate Height)
Non-Floor Damaging
For Level Surfaces

32 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A16 & Straight-line machine skate B16 for heavy equipment moving.

Model A16

Steerable Front machine skate with pulling handle


Model B16 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 32 tons (64,000 lbs)
Each Skate: 16 tons (32,000 lbs)


3.5" Wheels

(4.9" Skate Height)
Non-Floor Damaging
For Level Surfaces

40 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A20 & Straight-line machine skate B20 for heavy equipment moving.

Model A20

Steerable Front machine skate with pulling handle


Model B20 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 40 tons (80,000 lbs)
Each Skate: 20 tons (40,000 lbs)


5.5" Wheels

(7.1" Skate Height)
Non-Floor Damaging
For Level Surfaces

50 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A25 & Straight-line machine skate B25 for heavy equipment moving.

Model A25

Steerable Front machine skate with pulling handle


Model B25 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 50 tons (100,000 lbs)
Each Skate: 25 tons (50,000 lbs)


5.5" Wheels

(7.1" Skate Height)
Non-Floor Damaging
For Level Surfaces

80 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A40 & Straight-line machine skate B40 for heavy equipment moving.

Model A40

Steerable Front machine skate with pulling handle


Model B40 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 80 tons (160,000 lbs)
Each Skate: 40 tons (80,000 lbs)


7.9" Wheels

(9.1" Skate Height)
Non-Floor Damaging
For Level Surfaces

120 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A60 & Straight-line machine skate B60 for heavy equipment moving.

Model A60

Steerable Front machine skate with pulling handle


Model B60 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 120 tons (240,000 lbs)
Each Skate: 60 tons (120,000 lbs)


7.9" Wheels

(9.1" Skate Height)
Non-Floor Damaging
For Level Surfaces

160 Ton Machine Skates

! Each model sold separately. Mix and match sets for uneven or oddly-shaped loads!
Use steerable rigging skate model A80 & Straight-line machine skate B80 for heavy equipment moving.

Model A80

Steerable Front machine skate with pulling handle


Model B80 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Set Capacity: 160 tons (320,000 lbs)
Each Skate: 80 tons (160,000 lbs)


7.9" Wheels

(9.4" Skate Height)
Non-Floor Damaging
For Level Surfaces

Machine Skate B130

Use steerable rigging skate model  & Straight-line machine skate B130 for heavy equipment moving.

Model B130 (Incl. 2 Skates)

Adjustable-Width Rear machine skates with connecting bar


Expertly manufactured in Germany by JUNG and exclusively stocked and distributed in North America by Toolwell, Inc.

Capacities

Capacity: 130 tons (260,000 lbs)


7.9" Wheels

(9.4" Skate Height)
Non-Floor Damaging
For Level Surfaces

All machine skates and toe jacks are manufactured by JUNG in Germany. Toolwell is the exlusive manufacturer's representative for JUNG load moving equipment in North America. Please call us for sales and support, including same day shipping of parts and equipment from our US warehouses.